Zodiac International - Additions
Radical Radius for Indian Scout 2025
Freedom Performance Radical Radius exhausts feature one piece 2 1/2" (64 mm) outer diameter 16-gauge heavy duty heat shields that cover the headers for a full 220 degrees. They have a three-step header system for optimal horsepower and torque. The curved mufflers give an aggressive deep growl.
Baffles are removable, and a quiet baffle kit is available as an accessory. These exhausts come complete and ready to bolt on and include stainless steel hardware and brackets. They fit all Indian Scout 2025 to present - models with passenger pegs require a ZPN 783406 relocator kit. They are available in chrome or black with a choice of tips.
RBW Skull Snap Tuner for 2021 and up Models
This RBW Skull Snap is an affordable and effective solution for boosting horsepower and torque on nearly all Euro 5 motorcycles, including all 2021 to present Euro 5-compliant Harley-Davidson models. This compact OBD2 tuning device fine-tunes the O2 sensor readings, allowing the fuel injection system to optimize the air-fuel mixture for peak performance, especially when using open exhaust systems or high-flow air cleaners.
It also prevents error codes related to O2 sensors during operation. Installation couldn’t be simpler, just plug it into the OBD2 connector and you're ready to ride. Note: The rear O2 sensor(s) must remain connected to the wiring harness but do not need to be physically installed in the exhaust system. It fits all Harley-Davidson motorcycles 2021 to present equipped with a red OBD2 connector.
Performance Machine Monoblock Calipers
CNC machined from a single piece of solid billet aluminum, the Performance Machine Race Series Monobloc Caliper "cuts no corners in providing the very best stopping power for H-D motorcycles." Large diameter pistons combined with the extra rigidity of a monobloc design provide a staggering 20% increase in stopping power over OEM units.
They are compatible with ABS and non-ABS brakes, OEM or Aftermarket Master Cylinders. Calipers are sold each, order one left and one right for dual disc models. They are available for a wide range of fitments.
OptiMate 1 VoltMatic 6- and 12-Volt Battery Chargers
The OptiMate 1 VoltMatic automatically adapts to the battery voltage (6V or 12V). Just connect it and the VoltMatic does the rest, no supervision required. Ideal for standard, GM, Gel and sealed VRLA 6V or 12V lead-acid batteries. Delivers 0.6 Amps charge current recommended for maintenance of batteries up to 28Ah as used in motorcycles.
Dynatek 2-Stage Rev-Limiter
This two-stage rev-limiter is designed to provide accurate launching RPMs so that the rider can concentrate on the start and not on RPMs. The limiter uses a unique control function which makes an instant decision at the time of firing. A 2x16 position switch is used to set launching RPMs (2500-6250) with an interval of 125 RPM.
High RPM limits (5500-9250) are selected by a separate knob with an interval of 250 RPM. It holds launch limit at +/- 50 RPM for precise engine RPM limiting and works with electronic Single and Dual Fire ignitions. The rev-limiter fits H-D models with OEM or aftermarket electronic ignition. It ships either with universal wiring or as a direct-plug-in for M8 2017 to present.
Joker Machine Scout Footpegs
These pegs are fully CNC machined (at Joker Machine's Lake Havasu City, Arizona headquarters) from solid 6061-T6 bar. They are a 2-piece, super strong, yet light-weight construction, providing a wider foot surface for a comfortable ride. The serrated surface provides a good bite to the bottom of your shoe. Full 360-degree peg rotation makes them versatile enough for any application, and a pitch adjustment screw always keeps them in a good riding position.
These pegs are sold in pairs and fit all Indian Scout 2015 to present and 2017 Victory Octane models. The long-serrated pegs measure 4 1/2" long, 2 1/2" wide and 1" thick (11.4 x 6.35 x 2.5cm); the short-serrated pegs, 3 5/16" long, 2 1/2" wide, 1" thick (8.4 x 6.35 x 2.5cm). They are available for driver or passenger, come in natural aluminum or hard black anodized finish with additional style including Narrow, Heel, Stubby Short, Bear Claw and Racing styles.
ZODIAC INTERNATIONAL BV
