topbanner ad

Tuesday, 8 June 2021

Hawg Halters Inc.

Hawg Halters Adds Caliper Finishes

Hawg Halters Inc. has just added a new twist to its 4 and 6 piston direct bolt-on differential bore calipers.


They are now available in a "stunning new array of caliper finishes to put the final touch on your customer's ride."
HHi is now delivering its brake calipers in Aztec Red, Cobalt Blue and Inca Gold as well as its classic show chrome and black treatments.
All HHI differential bore brake calipers are direct bolt-on and fit 11.5, 11.8, 13 and 18 inch applications on most popular Harley models. For custom builders, HHI wheels and brakes can be ordered in matching or contrast finishes.

HAWG HALTERS INC.
www.hawghalters.com

Belt Drives Limited

Shovelhead Drive Lines

The Belt Drives Limited EVBB-3T-4, seen here, was developed for big inch, big horsepower Shovelhead drivelines from 1970 to 1983, running 4-speed transmissions and rear chain drive.
This is BDL's ball bearing version of their popular EVB-3T-4 drive. The conversions address inconsistent clutch adjustment and the notorious stock oil leaks all in one hit - "no more floating basket to contend with and, best of all, no more unreliable clutch."


The 68-tooth basket and 45-tooth front pulley come with the BDL-138-38K belt, providing a 1.511:1 gear ratio. This is a performance clutch kit and incorporates BDL's well known, tried and proven ball bearing lock-up assist pressure plate.

BELT DRIVES LTD
www.beltdrives.com

Tuesday, 1 June 2021

ACEM

Connected Motorcycle Consortium - this is Big News

Founded in 2016, the Connected Motorcycle Consortium (CMC) is a multi-manufacturer effort to establish a common standard that would be a foundation on which motorcycle makers could base interconnectivity systems and devices (Cooperative Intelligent Transport Systems/C-ITS) for motorcycles to be able to communicate with other vehicles.
After four years, December 2020 finally saw the members of CMC (ACEM, BMW, KTM, Honda, Yamaha, Suzuki and Triumph) publish the 'Basic Specification' - a set of documents addressing various topics related to the introduction of C-ITS for motorcycles, such as the system triggering conditions, localization accuracy, algorithms and communicated data, as well as rider interface and antenna performance.


ACEM's Antonio Perlot stated: "This breakthrough result is the outcome of all the efforts made over the years by CMC members. They have been working intensively to achieve this goal and have made significant progress in this area through several studies, the development and evaluation of prototype bikes and through meetings and discussions with different major stakeholders.


"the work of CMC 'Next' started in January 2021"

 

"The CMC built on the ACEM Memorandum of Understanding on Cooperative Intelligent Transport Systems - motorcycle manufacturers, suppliers, researchers and associations joined forces with the objective to make motorcycles part of the future connected mobility." The primary first objective of the consortium has now been achieved by meeting the stated aim to define common 'Basic Specifications' for C-ITS systems for motorcycles and have them ready for publication by the end of 2020.
C-ITS allows road vehicles to communicate with each other, with roadside infrastructure and with other road users. C-ITS has a high potential to prevent accidents, especially for motorcycles. CMC has been working on around 30 applications in which connectivity would warn drivers and riders of potentially dangerous situations.
"The integration of motorcycles in the C-ITS ecosystem will bring significant safety benefits and will lead to better integration of motorcycles in the transport system," said Perlot.
At the presentation of the 'Basic Specification' documents and signing of the extended CMC 'Next' agreement between the manufacturers, BMW stated that "for decades, BMW Motorrad has been leading the way with regard to improving motorcycling safety. As a founding member of the CMC, BMW Motorrad will continue to work together with other renowned manufacturers to further increase the safety of motorcycling and to make riding pleasure on two wheels even safer and more attractive".


The next phase will now see the approach widened and the work include investigating the conspicuity of motorcycles by ADAS systems (Advanced Driver Assistance System). This 'system' approach looks at creating synergies between on-board sensor systems and connectivity.
"The 'Basic Specification' is a first step to describe the function of motorcycle V2X systems (Vehicles- to-Everything - which includes 'Vehicle-to-Vehicle' and 'Vehicle-to-Infrastructure'). In a further step beyond basic specification, the participating manufacturers will define further essential functional requirements to standardize in detail.

 

"V2X - 'Vehicle-to-Everything' communications technology"  

 

Now that motorcycles will be able to develop standardized communication, a further crucial step for CMC 'Next' is cooperation with the car industry and other vehicle manufacturers, so that motorcycles can integrate with the on-board sensor systems (radar, camera, etc.) and driver assistance systems being developed in the automotive, rapid transit and road freight markets.
CMC believes that tailored motorcycle/car scenarios and tests need to be developed and standardized. The new organization has already started its work in January 2021. The six motorcycle manufacturers encourage other motorcycle manufacturers, suppliers, car manufacturers and the other related organizations to join the cooperation to further pursue the deployment of new elements for motorcycle safety.


Executive Officer Takuya Kinoshita, Chief General Manager of Motorcycle Business Operations for Yamaha Motor Co. Ltd., stated: "The future of traffic has to be one of being increasingly connected, and motorcycles must be integrated into that ecosystem.
"Motorcycles need to stay a solution and remain an enjoyable means of transport for the decades to come. This is why activities like CMC are so important for the motorcycle industry."
The CMC 'Basic Standard' documents are available for download at www.cmc-info.net




AFT

Briar Bauman Wins Chicago Half-Mile

After a four-week break since the Atlanta TT (the Texas Half-Mile was a weather casualty), AFT Racing resumed at the Dirt Oval at Route 66 Speedway in Joliet, Illinois, for the Chicago Half-Mile on May 29 with Briar Bauman (No. 1 Indian Motorcycle/Progressive Insurance FTR750) taking the Mission SuperTwins presented by S&S Cycle win - reminding us why he’s the two-time defending Grand National Champion. His dominant performance finally broke his uncharacteristic eight-race wins drought.


A wild opening, several minutes saw him repeatedly cross lines and swap positions as part of an energized five-rider lead pack that also included his brother Bronson Bauman (No. 37 Indian Motorcycle of Oklahoma City FTR750), Jared Mees (No. 9 Indian Motorcycle/Progressive Insurance FTR750), Jarod Vanderkooi (No. 20 Mission Roof Systems Indian FTR750) and Brandon Robinson (No. 44 Mission Roof Systems Indian FTR750).
That scintillating multi-line dogfight for victory was cut short near mid-distance when Mees got into the back of Robinson's machine. In a slow-developing incident, Mees was stood up twice and was nearly thrown over the bars. Ultimately, he held on and stayed upright, but Robinson was not nearly so lucky as his bike was spun out from underneath him.
Moments later, James Rispoli (No. 43 Latus Motors Racing Harley-Davidson XG750R Rev X) joined Robinson on the deck, crashing as a result of the evasive action he took to avoid striking the downed rider.
A staggered restart saw the reigning champion quickly establish a solid lead, and Vanderkooi eventually brought it home in second, with Mees third, Brandon Robinson fourth and the younger Bauman fifth.
In the AFT Singles, the Australian Max Whale on the factory KTM (No. 18 Red Bull KTM Factory Racing 450 SX-FFE) saw off the challenge from Morgen Mischler (No. 13 Mission Roof Systems KTM 450 SX-F) to make it a brand one-two for KTM, followed by Holeshot winner Mikey Rush (No. 15 Estenson Racing Yamaha YZ450F) and reigning class champion Dallas Daniels (No. 1 Estenson Racing Yamaha YZ450F), who continues to lead the title fight, in fourth, ahead of Michael Inderbitzin in fifth (No. 54 Pacific Tub & Tile Honda CRF450R).
The AFT Production Twins presented by Vance & Hines saw Cory Texter (No. 65 G&G Racing/Roof Systems Yamaha MT-07) outduel Chad Cose (No. 49 Voodoo Ranger/Roof Systems Harley-Davidson XG750R) in a stunning late-race shootout to become the first AFT Production Twins presented by Vance & Hines rider to score a second victory in 2021.
The battle gradually took shape over the course of a highly entertaining Main Event as the early thrills at the front were delivered by the likes of Dalton Gauthier (No. 79 D&D Cycles/Vance & Hines Harley-Davidson XG750R), Danny Eslick (No. 64 Pro One Industries Kawasaki Ninja 650), Johnny Lewis (No. 10 Moto Anatomy X Powered by Royal Enfield Twins FT) and Ben Lowe (No. 25 Mission Roof Systems Harley-Davidson XG750R).
At mid-distance Eslick was doing all that he could aboard his Kawasaki to fend off a fleet of Harleys from the low line, at least until Cose made his move. The Californian went around Eslick and then up the inside of Lowe in rapid succession and put his head down in a bid to escape.
Texter, meanwhile, systematically worked his way forward from further behind, closing in on Cose as the minutes ticked away. Once Texter decided to make his push for the win, the jockeying kicked into high gear. The final minute (plus two laps) saw the two trade the lead back and forth on five occasions, with Texter executing the final maneuver just as the two took the white flag. Cose made one last desperate attempt around the outside, but came up 0.114 seconds short at the checkered flag.
Daytona 200 legend Eslick rounded out the podium, with Lowe a few tenths back fourth and Ryan Varnes (No. 68 RVR/RoyBuilt Don’s Kawasaki Ninja 650) in fifth.
Next up is Oklahoma OKC Mile I & II double header (June 18 and 19), followed by the Lima Half-Mile (Ohio) powered by Drag Specialties, June 26; the DuQuoin Mile, Illinois (July 17), and the Port Royal Half-Mile (PA) on July 24.  
www.americanflattrack.com


May 29th - Chicago Half-Mile

Mission Super Twins Presented by S&S Cycle

1. Briar Bauman - Indian FTR750, Indian Motorcycle/Progressive
2. Jarod Vanderkooi - Indian FTR750, Mission Foods/Roof Systems
3. Jared Mees - Indian FTR750, Indian Motorcycle/Progressive
4. Brandon Robinson - Indian FTR750, Mission Foods/Roof Systems
5. Bronson Bauman - Indian FTR750, Indian Motorcycle

Singles
1. Max Whale - KTM 450 SX-FFE, Red Bull KTM Factory Racing
2. Morgen Mischler - KTM 450 SX-F, Mission Foods/ Roof Systems DFW
3. Michael Rush - Yamaha YZ450F, Estenson Racing/Yamaha Racing
4. Dallas Daniels - Yamaha YZ450F, Estenson Racing/Yamaha Racing
5. Michael Inderbitzin - Honda CRF450R, Pacific Tub & Tile/6D Helmets

Production Twins presented by Vance & Hines
1. Cory Texter - Yamaha MT-07, G&G Racing/Yamaha Racing
2. Chad Cose - H-D XG750R, Voodoo Ranger/Roof Systems/Vance & Hines
3. Daniel Eslick - Kawasaki Ninja 650, Bob Berry/Clayton Criswell
4. Ben Lowe - H-D XG750R, Mission Foods/ Roof Systems DFW
5. Ryan Varnes - Kawasaki Ninja 650, RVR Rausch Fuel/Dick Ford Risbon Excavating


Surflex

Surflex, Italy - Declared a "Historic Brand'

Italian clutch specialist Surflex has been granted 'Marchio Storico' - the "Italian historic mark" - recognizing its 70 years as a motorcycle component manufacturer.
Surflex was the first Italian company to produce clutches for motorcycle use, and it is still the only one dealing mainly in clutches to fit motorcycles, and the only one still producing completely and exclusively in its Italian facilities from the design to the production, with in-house engineered equipment and tools.


Those 70 years have resulted in a range of 15,000 clutch components for motorcycles dating back to 1920, right up to 2021 models, from discs to complete clutches - often developed in close design and testing co-operation with motorcycle manufacturers.
Clutch assemblies for classic bikes are still produced, using updated tooling and manufacturing technologies in order to provide older bikes with the same grade of replacements and upgrades offered for contemporary and late model machines.

 




Surflex also manufactures replacements and OEM upgrades using more than 300 different friction materials - organic, semi-metallic and metal powder sintered, all three in application-specific formulations.
Special clutch components are made in precision CNC-machined high-strength, lightweight Ergal (7075 zinc aluminum alloy); complete anti-hop clutches made to an exclusive and patented Surflex design; and among its specialty output are a small range of rare pads and sintered pads for trial races - such is its commitment to and pedigree in the motorcycle market.
The 'Marchio Storico' - the "Italian historic mark" - is no 'small thing' - it is considered a highly prestigious accolade and is only ever granted to the most respected Italian manufacturers - those who have made significant contributions to Italian industry and commerce over several decades.
www.surflex.it


Triumph

Euro 5 Triumph Scrambler 1200

I know that, in theory, there are plenty of reasons and explanations as to why Harley hasn't got into the Scrambler market - or its kissing-cousin Street Tracker market - but with the lights likely to be about to go dark on the venerable Sportster (according to all the reports we've been seeing for the past nine months or more), is Harley's failure to update rather than abandon its XL niche as clever as it thinks?
With the likes of Biltwell and others having shown just what could be done with Sportsters, it does beg a question when you see what can be achieved by a low-volume, low cost (Thailand) production run in the hands of someone like Triumph - to say nothing of the Ducati Scramblers and no end of Chinese manufacturers, including QJ's Benelli Scrambler-esque badged output.
 

The 'Steve McQueen' Scrambler special edition

Triumph's Scrambler 1200 XC and XE may not have delivered quite the "category-dominating specification and style, incredible torque delivery and signature soundtrack" that the company is claiming it has, but stimulated by the need to be Euro 5 compliant, the new 2022 update shows what can be done, delivering lower emissions "whilst retaining all the thrilling performance, high power and torque that they are renowned for."
Alongside the 2022 generation Scramblers comes "a new, beautiful and unique limited edition that celebrates the most famous movie star, stunt and motorcycle in history - the Scrambler 1200 Steve McQueen Edition."
The new engine update is matched to an updated exhaust system with improved heat distribution, a high power 1200 cc Bonneville twin engine with dedicated Scrambler tune (81 lb-ft at a low 4,500  rpm and 89 hp at 7,250 rpm), Öhlins long travel, fully adjustable RSUs and long travel Showa forks, up to six riding modes, including Off-Road Pro, optimized cornering ABS and optimized cornering traction control - "a dual-purpose Classic and Adventure cross-over."
Given the ability to compete that Harley's engineers have demonstrated with the Pan America, surely it is only a matter of time before Milwaukee becomes tri-lingual and learns to talk 'Alt Moto' as well as Big Twin and ADV?
With Triumph's MSRP for its Euro 5 compliant Scrambler 1200 XC quoted at USD $14,000, rising to $16,400 for the 'McQueen', it is not as if it’s a niche that couldn't have balance sheet juice in it, and it certainly wouldn't do the Bar 'n Shield brand any harm at all with the next generation of mid-life buyers. It is still a shame that nothing ever came of the contacts between Harley and ATK.





National Cycle

Back to a Period-Correct Future

There aren't many motorcycles still in working order from 1937 - most have long since either disappeared or are now enjoying quiet retirement in a museum or collection of some kind.
There are even fewer accessory vendors from then still in business today, but one such - National Cycle of Maywood, Illinois - is not only still in rude health as a world leader in the windshields business, but still has the 'Heritage Chops' to not just recognize and honor its own past, but to do so in the context of the extraordinary journey of development that motorcycle design has been in that time.




Founded as 'The Nation's Cycle Center' in 1937 by a certain Gordon Willey, National Cycle, as it has been to generations of riders, is still in the same family ownership, with Barry Willey and his wife Ann still very firmly at the helm.
Under their stewardship the business has never failed to move forward, especially where embracing and developing advanced materials and windshield safety is concerned - but so too, Ann and Barry have never forgotten their roots.

These new vintage style, beaded windshields in four color options are now available for restoring 1936-47 Knuckleheads or 1948 Panheads.
These windshields were modeled directly from actual vintage windshields that National Cycle manufactured beginning in 1937. "If your original windshield is old or cracked, replace it with an exact reproduction made by the same original manufacturer - National Cycle!"
The National Cycle vintage beaded windshields come complete with mounting hardware exactly like the originals, and with lower sections in choice of clear, blue, red or black.
The period-correct windshields were made from Pyralin plastic, which was somewhat flexible and thus required a beaded edge as well as a steel reinforcing ring.
These new reproductions are made from virtually unbreakable polycarbonate, with the upper section having National Cycle's exclusive Quantum hardcoating for what is widely recognized as the world's best scratch resistance.
The beaded edge and steel ring are retained for an authentic, period-correct appearance. All National Cycle polycarbonate windscreens are protected by a 3-year warranty against breakage.
www.nationalcycle.com

Biltwell

Three-Snap Bubble Shields

Californian helmet designer Biltwell says its bubble shields "have the perfect vintage look on any three-snap helmet - like our own Gringo or Bonanza - but they are also packed with a variety of high-tech features."


Features such as colored shields with in-molded tint technology, injection-molded scratch and impact-resistant polycarbonate thermoplastic construction, and durable plated stainless steel snaps that fasten securely to snaps on the helmet brow for easy installation.
The mirrored shields feature reflective technology in a variety of surface finishes to reduce glare, and Biltwell says that "every shield color and style provides 91% UV/A and 99% AV/B light resistance based on AATCC-138 test standard" and that the "anti-fog treatment on the shield interior fights moisture build-up from breathing and humidity."

BILTWELL INC.

www.biltwellinc.com