Zodiac International Additions
Arlen Ness Oil Pressure Gauge Kits
Featuring a stainless housing and glass lens - filled with vibration-dampening glycerine for lasting performance - a billet bracket mounts this oil pressure gauge to the rear rocker box. The complete kit includes Ness 1 1/2" (38 mm) diameter 0-60 gauge billet bracket and cone, stainless steel hose assembly and necessary mounting hardware. They are available in Radius chrome and black and deep cut black design for 1984-2000 Evolution Big Twin and 1999-2017 Twin Cam Softail and deep cut design for 1993-2020 Evolution Sportster.
Replica Linkert M51 and M51L Carburetors
Completely built in Europe from all new parts, these authentic replica M51 (1-1/16") and M51L (1-1/8") venturi carburetors look completely the same as the original. Built with 1941 up features, such as lever for aluminum heads and a choke lever for the large 7-inch round air cleaner. They fit U and UL 1937-1948, WL and WLD 1942-1948, 1942-1948 Harley UL, ULH Police 1942-1948.
Linkert Tool Kit
Linkert carburetors have been used on Harley-Davidson motorcycles from 1930 through 1966 and some 1969 XLB Sportster Army models. This kit contains a wide variety of tools to service them. The kit includes six special drill pivots with brass knurled handles, an idle shot tool and a venturi tool for use on all years brass Linkert carburetor bodies. Drill bit sizes include #55 (1.3 mm), #53 (1.5 mm), #56 (1.2 mm), #42 (2.3 mm) and #72 (0.6 mm). The #55 drill bit is used by two different length handles.
Slot tool blade sizes include .017" and .009" for all carburetors. The 1 3/16" collar is used for M41 1 1/16" and 1 1/18" carburetors. The 1 3/8" collar is used for M-2, 5, 6, 21, 31, 41, 41L, 42, 51, 51L, 52, 54, 54B, 55, 58, 64, 84, 88, 90, 97, 341, 343, 344, 350, 352 and 641 carburetors. The 1 9/16" collar is used for M-35, 35T, 35TP, 36, 36A, 45, 45A, 61, 61B, 74, and 74B carburetors. Note that drills and tool blades are for hand use only. The use of an arbor or hydraulic press is recommended.
"P16" Powerplant Risers and Optional Gauge Mounts
New from Yaniv Evan's "P16" Powerplant in Southern California, these risers feature Powerplant proprietary I-Beam design for maximum strength and stability and complement vintage and modern aesthetics. They are ready to take the separately available gauge mount and come complete with stainless steel hardware. Available in 8" (20 cm) and 10" (25 cm) in black, bronze, gold, polished and red.
Turn Signal Thumb Extensions
These turn signal extension caps allow you to easily activate the handlebar turn signal switches without repositioning or removing the hands from the grips and improve the feel when wearing gloves. The one-piece design features a contoured thumb extension that places the left and right- hand signal control in a comfortable position. The thumb extensions replace the stock turn signal switch caps without rewiring. Sold in sets with left- and right-side extension knobs, they are available in black or chrome for a wide range of V-Rods, XR Sportster, XL Sportster, Touring, Softail, Trike and Dyna models.
ZODIAC INTERNATIONAL BV
www.zodiac.nl
