As of 1 January 2020, all new type-approved motorcycles and mopeds sold in the European Union (EU) and the European Free Trade Area (EFTA) will have to meet the new Euro 5 environmental standard, replacing the current Euro 4 specification.
For existing moped and motorcycle models type-approved before the 1 January 2020, Euro 5 will become mandatory as of the first day of 2021. This brings the pollutant emissions of L-category vehicles (i.e. mopeds, motorcycles, tricycles and quadricycles) to the same level as Euro 6 cars.
In a release dated December 16th, ACEM, the Brussels based international motorcycle trade association in Europe said that "technical innovation in the motorcycle industry has played a key role in progressively lowering vehicle emissions. Since the introduction of the Euro 1 standard for motorcycles and mopeds in 1999, pollutant emissions have been drastically reduced. Combined emissions of hydrocarbons (HC) and nitrogen oxides (NOx) have gone down by 96.6%, whilst carbon monoxide (CO) emissions have been reduced by 92.3%."Under the new Euro 5 standard, tailpipe emissions of mopeds, motorcycles, tricycles and quadricycles will not be allowed to exceed 1,000 mg/km of carbon monoxide (CO), 100 mg/km total hydrocarbons (THC), 68 mg/km non-methane hydrocarbons (NMHC), 60 mg/km of oxides of nitrogen (NOx) and 4.5 mg/km of particulate matter (PM). These Euro 5 tailpipe pollutant emission limits are the same as those of Euro 6 for cars.
"The new Euro 5 standard that will replace the previous one (Euro 4) will become mandatory for all new type-approved motorcycles and mopeds as of 1 January 2020. Some niche segments (i.e. enduro and trial motorcycles, three-wheeled mopeds designed for utility purposes and light quadrimobiles) have been granted additional lead time. These niche products will have to comply with the new Euro 5 tailpipe emissions limits as of 1 January 2024.
 |
| Antonio Perlot, ACEM Secretary General: "From a supply side perspective, vehicle technology has been instrumental in improving the environmental performance of motorcycles." |
"Durability provisions and evaporative emission levels are equally becoming more stringent. Another important innovation is the progressive introduction of a second stage on-board diagnostic (OBD), allowing advanced identification and flagging of malfunction and deterioration of emission control systems."
Antonio Perlot, ACEM Secretary General, said: "From a supply side perspective, vehicle technology has been instrumental in improving the environmental performance of motorcycles. ACEM members have invested heavily in research and product development to develop Euro 5 compliant motorcycles equipped with technologies such as 3-way catalysts with oxygen sensor controls, complex electronic engine management systems, advanced fuel injection and variable valve timing and lift technologies.
"As a result of this, the environmental performance of Euro 5 motorcycles will be equivalent to that of Euro 6 cars. ACEM sees this fitting within the vision of the recent European Green Deal of achieving less polluting transport, especially in cities, and further enabling the contribution of our range of vehicles to a multimodal transport system."
