Drag Specialties

Drag Specialties Additions

+6" Custom Springer Forks

An economical Old School alternative to a shock-dampened type Springer, these forks come fully assembled with an in-line top bracket without a built-in rake. They measure 37" from top bearing to axle and have a 1" outer diameter steering stem that has been designed for Timken type bearings. Both rear legs come threaded for right or left brakes. 

The forks require a wheel compatible with a 3/4" outer diameter axle. The included 3/4" outer diameter axle kit contains a brake mount pivot with thrust washer and hub spacers (custom spacers might be required depending on the wheel used). The forks measure 9 1⁄4" between the rockers and the riser mounts are on 4 3/4" centers and threaded 1/2"-20. 

These forks do not accept spotlight bars and have no fender mounts. Available in chrome and black for '84-'17 Big Twin and '86-'03 XL models (except Dressers and Dyna Glides). 

Frame-Mounted Heat Deflectors

These Drag Specialties frame-mounted heat deflectors direct heat away from the rider. Easy to install with included hardware, they mount to the frame just under the front of the seat. They are made from a tough plastic for durability and come in a black finish. Available for '08-'17 Softail models (except FXCW/C, FXSB/SE and FXSE, repl. OEM #29200008A). Sold in pairs.

Center Stands

These Drag Specialties center stands lift the bike upright for easier cleaning and servicing and take up less space when parking the bike up. Adjustable feet allow the rear tire to be lifted off the ground and works with both OE and profile rear suspensions. With a bolt on design, there is no loss of lean angle. 

These stands are available in chrome and black (repl. OEM #91573-09A) for '09-'23 FLHT, FLHR, FLHX, FLTR models (except FLHTKSE, FLTRUSE and '07-'11 FLHTCUSE). Not for use on models with adjustable passenger floorboard mount kit (OEM #50768-07). 

'Freedom' Touring Seat

The 'Freedom' Touring seat from Drag Seats features a 5 ¾" tall driver support with unique styling and is covered in high-quality automotive-grade vinyl. Seating area is contoured for maximum comfort and is made narrow up front for better leg clearance.  This seat also works with the DS EZ Glide frame-mounted driver backrest receiver mechanism and will also work with H-D and OEM frame-mounted backrest mechanisms and backrest pads. 

The seat is available in smooth solar-reflective leather, smooth vinyl and Double Diamond stitch vinyl with black, silver or red thread for '97-'07 FLHT/ FLHTC/ FLHTCU/ FLHR/ FLHX/ FLTR models.  All mounting hardware is included and FLHT and FLTR applications will use the included lower dash panel extension.

Primary Chain Auto Adjuster Kits

Drag Specialties primary chain auto adjuster kits are used for updating an old adjuster system or when building a new bike from the ground up. These kits include an adjuster plate, bolts, shoe, brackets and hardware. Available for '01-'06 FLHT, FLHR, FLHX, FLTR, FXST, FLST; '01-'05 FXD, FXDWG; '84-'00 FLHT, FLHR, FLTR, FXST, FLST and '91-'00 FXD, FXDWG.

DRAG SPECIALTIES 

www.dragspecialties.com