topbanner ad

Tuesday, 21 April 2015

Zodiac International

New additions to range at Zodiac

ZODIAC’S latest additions to its product range include bolt-on neck kits from American Suspension that allow for the correct geometry to run either a 26in or 30in front wheel on Touring models. The patent pending kits, which can be removed to return a bike to stock for resale, include a billet aluminum neck, steering stem, billet aluminum triple trees, bushings, fork caps, and bearings. Kits for 26in wheels are available for ’01-’08, ’09-’13 and ’14 to present Touring models and the same fittings are available in the 30in options.

The Fuel Tool range being stocked by Zodiac includes O-ring kits and rebuild kits that allow the repair of a leaking check valve and fuel line instead of replacing the complete unit. There is also the option of an additional professional installation kit that allows the job to be done without removal of the gas tank. The kits are designed to be used on ‘01 to present Delphi fuel injected models, except V-Rods. 

Also from Fuel Tools, and available through Zodiac, is a quick disconnect fuel pressure gauge. It has been designed to allow users to quickly diagnose any fuel system related issues, such as loss of power, poor fuel economy, hesitation and stalling. The gauge works with all ‘01 to present Delphi fuel injected Harleys, except V-Rods, and features solid nickel plated brass adapter and release valve, steel housing 100psi gauge, Viton O-rings and O-ring lubricant and is supplied with a nylon storage pouch.

Following the announcement that it would be distributing BB Comfort Systems products, Zodiac now has the Butty Buddy pillion pads in stock. The Butty Buddys are extra-wide, ergonomic seat pads, which detach into three segments for easy storage and transport with the included carrying pouch. They are available with suction cups for bare rear fender or with clamps to fit over existing up to 11in wide seats. The over-seat Butty Buddy features rotational locking mechanisms and comes complete with the required hex tools and anti-blow off straps. Both versions have a lower aggressive gripper surface for a secure fit. 

Zodiac has increased the line of Euro-3 approved BSL Hot Shot exhausts it has available. Previously only available for Softail, Zodiac can supply BSL exhausts for selected Sportster and Dyna models now too. 

BSL Hot Shot pipes are made of 2mm thick stainless steel 2-3/4in diameter tubing. The pipes come in both Euro 3 and race versions. The Euro 3 version has a patented two catalytic insert and a baffle in each header to comply with the current European noise and emissions standards. The non-Euro 3 race version is available for selected models and has less restricting baffles and no catalytic converters for more horsepower and louder rumble. 

An exclusive line for Zodiac is the Texas Leather luggage range, which includes new Dyna side bags. The Dyna bags have been designed to match the lines of the bike and feature cowhide leather and 1in wide straps. Straps are also supplied to tie the bags to supports, which are available separately. Sold individually, the bags measure 12in high, 12in wide and are 4.5in deep with a capacity of 9.5 US quart. 

Saddlebag supports are available in chrome to fit ’91-‘05 Dyna, except Wide Glide (turn signal relocation required), ’91-‘05 Dyna, including Wide Glide (turn signal relocation required), ‘09 to present FXDB Street Bob, ‘10 to present FXDWG Dyna Wide Glide, ‘08 to present FXDF Fat Bob, ‘06 to present Dyna, except ‘08 to present FXDF Fat Bob, ‘09 to present FXDB Street Bob and 06 to present FXDWG Dyna Wide Glide. Black finished saddlebag supports are offered for ‘09 to present FXDB Street Bob, ‘06 to present Dyna, except ‘08 to present FXDF Fat Bob, ‘09 to present FXDB Street Bob and ‘06 to present FXDWG Dyna Wide Glide.

Tel: +31 (0)297 288 621