topbanner ad

Tuesday, 29 July 2014

S&S Cycle

S&S EZ Loader DIY fuel injection calibration

S&S Cycle has launched its EZ Loader to help riders easily tune the electronic fuel injection of their H-D motorcycles without the need for expensive dyno testing.
With the EZ Loader users can select and load S&S Cycle developed and dyno proven tune files into the bike’s ECM. The calibrations were developed exclusively for S&S Step 1 (intake and exhaust) and Step 2 (Cams) Proven Performance products.
The S&S EZ Loader can be loaded with new calibrations as the user upgrades the bike’s engine with the S&S 'Steps' process. Start with Step 1: for example the S&S Stealth air cleaner and Super Sidewinder 2-into1 exhaust. Use the S&S EZ Loader to select the parts, then the calibration, load it and go. When more power is required it is simply a case of move to Step 2 and install a set of S&S MR103 cams, select the calibration that matches, load it and ride.

The S&S EZ Loader comes with a USB cable and instructions, and is pre-loaded with all available S&S Step 1 and 2 calibration files (at time of production). Calibrations and firmware stored on the device can be updated anytime online when the Loader is connected to a computer.
The EZ Loader, which automatically recognizes the vehicle model it is installed on and only shows available calibration files, can be used on ‘11-‘14 103ci Harley-Davidson EFI big twins with Delphi module. Alongside tuning it can also be used to read and clear error codes and re-calibrate the speedo.
S&S Cycle is working on developing more calibrations and models, and will release details on them when they become available.
A video demonstrating the EZLoader is available to watch at

Viola, Wisconsin, USA
Tel: 608 627 1497