Zodiac International Additions
Cylinder Heads for 1955-1962 Panhead Big Twins
These original contour casting Panhead cylinder heads are assembled with cast iron guides, valve stem seals, nitrated Panhead exhaust and nitrated Shovelhead intake valves - in combination with a complete spring and collar set. Heads have up to .425" valve lift, feature O-ring type intake and use long-reach 1975-1984 Shovelhead style spark plugs.
European Classic Motorcycle Tires
These tires are produced in Europe as modern tube type tires "with the driving performance the modern tire design gives, but in the old bias design and dimensions." Tires are E and DOT approved and street legal for use in Europe as well as the U.S. P-rated tires are for motorcycles with a maximum speed of 150 km/h, S-rated tires are for motorcycles with a maximum speed of 180 km/h. They are available for 2.15", 3" and 5" wide rims.
Burly Brand Fat 'Folsom' T-Bars
These 1 1/4" (32 mm) diameter handlebars with 1" (25.4 mm) ends accept stock controls, are dimpled and pre-drilled to accept internal wiring. They bolt to the upper fork tree with 1/2"-13 UNC bolts on most Harleys with a 3 1/2" (89 mm) center to center. Bolts are not included. Handlebars are ready to take throttle-by-wire, as well as regular cable throttle - they may require modification to accept hydraulic clutch control. They are available in 10", 12" and 14" heights.
Burly Brand 'Viejo' and 'Viejo Cito' handlebars
These 1" (25.4 mm) diameter handlebars are pre-drilled to accept internal wiring and ready to take either throttle-by-wire or cable throttle. They are available in 8" or 13" rise in black or chrome.
Devil and Wheel Fender Ornament
This Devil and Wheel fender ornament is made in pewter type metal with a silver finish for mounting with the included 1/4"-20 threaded stud. The dimensions are height 2 3/4" (7 cm), length 2 1/8" (5.4 cm), width 3/4" (1.9 cm).
ZODIAC INTERNATIONAL BV
www.zodiac.nl
