Forward Control Relocation Kit
This -1” rearward relocation kit moves the Drag Specialties forward control kit to allow shorter riders better reach to the pegs on ‘91-‘17 FXD models (except FXDF/FXDWG).
Extended Length Stainless Steel Front Brake Kits
These extended length brake line kits for ‘14-‘19 XL883N with ABS feature black vinyl-coated braided lines constructed of stainless steel with chrome steel fittings – choice of +2”, +4”, +6”, +8”, +10” or +12” extended lengths; all lengths meet DOT specifications.
DOT Compliant Rear Turn Signals
These matt or gloss black DOT compliant rear turn signals have 2 3/8” diameter lenses and come in clear and smoke colors. They mount with 5/16” hollow bolts and hidden wiring.
Buckhorn Low and Medium Handlebars
These new 1” Buckhorn high style handlebars are made from tough steel tubing in choice of (Low) 6 3/4” end rise, 31 1/4” width, 83/4” center width, 9” pullback; (Medium) 9” end rise, 34” width, 8 3/4” center width, 9” pullback. They are available in chrome, gloss black or flat black; for Throttle-By-Wire applications and slotted for internal wiring.
Cabellero Seats for FLHR Models
These seats feature a molded, flexible urethane foam interior for comfort and an ABS thermoformed seat base with carpeted bottom and rubber bumpers for added paint protection. Available in black solar reflective leather with smooth or diamond stitching or faux suede with diamond stitching for ‘99-‘07 FLHR models.
Predator III Seats
Available for ‘18 Fat Bobs - the driver’s seat area has a 6” tall support. The seat design is narrower at the front for better leg clearance, uses a molded polyurethane foam interior and a thermoformed ABS seat base. Available with a smooth seat cover or double-diamond stitched pattern cover with black, silver or red thread.
EFi Fuel Line for Dresser Models
Allowing the late-model Dresser running light to be retained, this high-quality OEM EFi fuel line replacement upgrades the fuel line that runs from the tank to the fuel rail – it ships with all the necessary connectors and O-rings needed to service all internal and external fuel lines on models with Delphi EFi - made for ‘12-‘16 FLHT/FLHR/FLTR/FLHX and H-D FL Trike models.
Front Floating Brake Rotor Mounting Hardware
All of the required hardware to mount the new-style front floating brake rotors for ‘14-‘18 FLHT/FLTR/FLHR/FLHX models with lug-mounted rotors is included in this kit. The kit contains five each of the bushings, spring washers and mounting screws. Replaces OEM #s 41500018 (bushings), 41500019 (spring washers) and 41500020 (screws).
Flat Black 1 1/4” Touring Handlebars
A stylish bolt-on Road Glide upgrade - the flat black finish “adds a sleek, sinister look.” Included black control clamps replace the oversize OEM clamps; the handlebars have a full 35 degrees of adjustment, are drilled for internal wiring and notched for Throttle-By-Wire. The stock controls can be retained; available in 10”, 12”, 14”, 16” and 18” heights for ‘15-‘18 Road Glide models.
Caliper Rebuild Kits
Drag Specialties has this high-quality replacement front caliper piston and seal kit for ‘08-‘19 FLHT/FLHR/FLTR/FLHX models.
DRAG SPECIALTIES
www.dragspecialties.com