Oreland, Pennsylvania specialist NAMZ Custom Cycle Products continues to deepen its presence in the burgeoning LED lights, accessories and components market with these Letric Lighting Co. Bullet style LEDs in amber, red, amber with white running lights and 3-function red run, red brake and amber turn signals.
Available for use with or without their Badlands lighting modules they fit all models with bullet style turn signals, 1156 or 1157 socket, front and rear.
These 100% plug-n-play, lifetime warranty backed Bullet LED Inserts are a multi-color, omni directional, surface mount LED solution with sealed 1156/1157 socket and heavy conformal coated circuit board.
They simply install into the OEM bullet-style turn signal housings on most H-D models. The 1156 turn signals are single intensity, (one power wire, one ground wire) and the 1157 turn signals are dual intensity, (one wire for running light, one wire for turn signal and one wire for ground).
A load equalizer is needed for all models except CAN/Bus equipped ‘11-up Softail, ‘12-up Dyna and all ‘14-up Models. NAMZ owner Jeff Zelinski says “our LEDs are genuinely and fully CAN/Bus compliant - not all those being offered on the market are, or are of the same quality.”
Also seen here, NAMZ Tour Pak EZ Harnesses and Hot Boxes “are a great and cost-effective way for anyone with a tour pack to replace the factory hard-wired harness with a quick-disconnect version,” says Zelinski.
“Available with or without the Hot Box module they connect between the rear fender wiring harness connection while providing running light, brake light and ground wire functionality to any tour pack.” The harnesses also have a small black connector that allows for a quick disconnect of the tour pack without removing the seat. The connector locates right next to the rear seat bolt, behind the seat on the fender.
“The versions with Hot Boxes are more robust and provide running lights, brake lights and turn signals to a tour pack for added safety and visibility. In order to use one of these harnesses, you will need to access the tour pack wiring and separate the left and right sides - this is simple to do and all our harnesses are genuine plug-n-play and ready to install.”
NAMZ CUSTOM CYCLE PRODUCTS
www.namzccp.com