MC BAGGERS has developed its EZ-ON rake kit to provide a no weld solution to raking the front of a Touring model to allow either a 26in or 30in wheel to be fitted.
The bolt-on EZ-ON kit means no frame cutting is needed so the bike’s warranty should not be affected; additionally the correct trail will be set for safe handling. The patent pending kit is made up of two sections - the frame’s neck and a set of raked triple trees. The sections that clamp around the bike’s frame are machined from 6061 T-6 aluminum and are held in place with SAE-4140 high strength steel fasteners. The 26in wheel kit rakes the steering head an additional seven degree with a further nine degrees in the triple trees. On the 30in wheel kit the triple trees have 12 degrees of rake and the frame bracket nine degrees of extra rake. Versions are available for ’09-’13 and ’14 Touring models.
Also included in the EZ-ON kit is MC Baggers’ bearing adjuster nut, which allows for easy adjustment of the bike’s head bearings. The nut is placed at the bottom of a lower triple tree for easy access. This means it is easy for a rider to adjust bearing tension to ride characteristics.
MC BAGGERS USA
Rancho Dominguez, California, USA
Tel: 310 735 8199
sales@mcbaggers.com
www.mcbaggers.com