W&W now has reproductions of the Cannonball MAG-12 design wheels popular on drag racing cars in the ‘60s. Although destined for use on cars, and only available in 15in and 18in diameters, the wheels were taken on by early chopper builders.
These new versions of the design are cast using modern aluminum alloys, and they also feature a changed hub design that allows for the installation of common H-D drum and disc brake systems, and that is compatible with a variety of Harley sprocket set-ups. Certified to take loads of 350kg per wheel, they are available sizes in 16 x 3in and 19 x 2.5in sizes, and a choice of barrel polished or finely bead-blasted finish to achieve a dull magnesium-like appearance.
All Cannonball MAG-12 wheels, which are certified by TÜV and JWL (JASO) approved, are supplied with a universal use hub and require a specific brake drum mounting kit or double flange adapter kit with bearings.
Easyriders short Bobber fenders can now be purchased through W&W. Designed for use on Sportsters 2004 onward, the fiber reinforced plastic, gel coat finished fenders mount to the original struts, which have to be shortened. A custom taillight and relocation of turn signals is also required when fitting the fender.
A new product at W&W is the Antigravity Micro-Start XP-3, which is an ultra-small and extremely powerful Lithium-Ion power source. Despite its small size it is said to be capable of jump starting any motorcycle, with its 200A jump starting ability. It can also be used to power or charge electronic devices such as iPads, cell phones, GPS, GoPro cameras, MP3 players and anything else that can be charged via a USB Bus.
The Micro-Start XP-3 features two power ports (a jump start port and a USB 5V output for charging or powering electronic devices); an LED flashlight with two flash patterns; over-charge and over-discharge protections; detachable mini jumper clamps and universal USB cable with three common tips: iPhone 4, USB 2.0 Mini-B and USB Micro-B. The Micro-Start XP-3 by Antigravity measures just 130 x 74 x 24mm.
Among the Roland Sands Design parts now being stocked by W&W are the Traction grips. Featuring deeply knurled and contoured rubber over a CNC machined aluminum body, the ends of the grip bodies also accept a choice of rippled or RSD logo inserts. The Traction grips are available in a choice of chrome, Black-Ops or polished finishes.
Traction shifter pegs are also available through W&W. The pegs, in billet aluminum in either chrome or black anodized finishes, or in brass, all have a rubber covering.
A feature of the Atlas Shrugged Z-bars from Pangea Speed is the use of 45 degree slash-cut lugs. The 1in diameter bars are open at the lower end to allow for internal wiring. Designed for use with ’81 and later controls, the Atlas bars are 11cm high, 60cm wide and have 11cm pullback.
W&W CYCLES
Wuerzburg, GERMANY
Tel: +49 (0)931 250 61 16
(01149 931 250 6116 from the US)
sales@wwag.com
www.wwag.com